| Attribute | Value |
|---|---|
| Product Type | Drawer box, fixed outer sleeve with pull-out inner drawer |
| Overall Dimensions | 89.68 × 89 × 85 × 39.75 mm |
| Unit Weight | 42.9 g |
| Outer Sleeve | 120 gsm white textured paper over 700 gsm single-face white greyboard |
| Inner Drawer | 120 gsm white sheepskin-texture paper over 700 gsm single-face white greyboard, 9 mm ribbon pull |
| Inner Tray Wrap | 12 mm black flocked foam with 17 gsm copy paper wrap |
| Logo Finish | Single black embossed foil, sample-verified on textured paper stock |
| Ribbon Attachment | Surface-mounted with high-strength adhesive, rated for repeated pulling |
| Board Load Test | 700 gsm greyboard tested on both sleeve and drawer for this size — no sag under repeated use |
| Certifications | FSC chain-of-custody available on request; PPWR-compliant documentation provided |
89.68 × 89 × 85 × 39.75 mm, and weighs 42.9 grams, built from 120 gsm white textured paper wrapped over 700 gsm single-face white greyboard for both the outer sleeve and the inner drawer.
A single black embossed foil logo sits on the sleeve's front face, and the drawer box is opened using a 9 mm ribbon pull mounted on its side edge.
As a drawer box manufacturer, Topvisio Packaging can provide the following certifications and compliance documentation for this product upon request:
FSC chain-of-custody
PPWR compliance documentation
ISO 9001 quality management system
ISO 14001 environmental management system
SEDEX ethical supply chain social responsibility audit
the inner drawer does the physical work of holding the product and sliding in and out.
That division matters structurally: the sleeve only needs to look good and hold its shape, while the drawer needs to survive repeated friction against the sleeve's inner walls without the finish wearing through.
This particular drawer box pairs that structure with a protective copy-paper wrap inside the drawer, wrapped directly around the product rather than used as a decorative liner.
That distinction matters for sourcing, because a wrap built for direct product contact needs a different print and coating spec than a purely decorative liner would.
The adhesive bond is the load-bearing element here, not the board itself.
The emboss registers cleanly against the textured background without flattening the paper's grain pattern or losing edge definition on the logo itself.
The drawer in particular sees repeated insertion and removal, and the board has been confirmed not to sag or lose its shape under that repeated use.
The outer sleeve moves through single-black printing, foil embossing for the logo, die-cutting, and automatic case-wrapping. The drawer is die-cut and wrapped on the same automatic line, then fitted with the ribbon pull.
The inner tray is die-cut separately and laminated as two layers — the flocked foam base and the copy paper wrap — before being seated inside the finished drawer.
The protective copy paper wrap also makes this format workable for products sensitive to surface contact, since the product never touches the flocked foam directly.
Jewelry & Small Accessories
Retail Gift Sets
Branded Corporate Gifting
Cosmetic Accessory Packaging
This drawer box can be produced with FSC-certified board on request, with chain-of-custody documentation supplied for retail compliance.
We also provide the material composition and packaging-weight documentation required under the EU Packaging and Packaging Waste Regulation for brands selling into European markets.
Several elements of this drawer box can be adjusted to match a brand's specific requirements.
The textured paper finish on the outer sleeve can be swapped for a different texture or color while keeping the same embossed foil process, and the foil color itself can move from black to gold or another finish depending on the branding.
The inner tray's flocked foam color can also be changed to match a brand's palette, and the copy paper wrap can be printed with a single spot color if a plain white wrap doesn't fit the intended presentation.
Any change to the overall footprint — moving away from 89.68 × 89 × 85 × 39.75 mm — would require re-testing the board weight for sag resistance at the new size, since the current 700 gsm specification has only been verified at this specific footprint rather than as a general-purpose figure.
Because the outer sleeve and inner drawer share the same 700 gsm greyboard and a closely related textured paper stock, larger orders benefit from consolidating material procurement across both components rather than sourcing them as separate line items.
This doesn't change the unit price dramatically on its own, but it does simplify supplier coordination and reduces the number of separate paper batches that need to be color-matched against each other during production.
Topvisio Packaging manufactures this product at its factory in Dongguan, Guangdong, China. Drawer and book-style boxes have a monthly production capacity of up to 800,000 units.
It wraps the product directly. Its function is dust protection and friction reduction between the product and the flocked foam tray, not a decorative show-through layer.
No. It's surface-mounted with a high-strength adhesive specifically rated for repeated pulling, and has been tested for that use case rather than assumed to hold.
No. This exact combination — black embossed foil over 120 gsm white textured paper — has already been sample-verified, and the emboss registers cleanly without flattening the paper's texture.
No. Both the sleeve and drawer have been tested at this specific footprint and have not shown sag or shape loss under repeated drawer box use.
This drawer box is produced by Topvisio Packaging. On request, we can supply FSC chain-of-custody documentation, PPWR compliance documentation, and audit records covering our ISO 9001 quality management system, ISO 14001 environmental management system, and SEDEX ethical supply chain social responsibility program.
Standard MOQ is 1,000 units. Smaller test runs may be available with a setup surcharge — ask when requesting a quote.
GET STARTED
Sample in 7 Days
Tell us your products, the box size, colour, and quantity.
We’ll respond within 24 hours.
Secondary Subheadings
Secondary Subheadings
Secondary Subheadings
